TDC-100 Specifications

Machine Control Ports Four. Standard 9-pin RS-422 female connectors. SMPTE pinouts
Control Protocol Sony/Odetics P2, standard '9-pin' RS-422 Protocol. 38.4K Baud, Odd Parity
P-Bus Input Ports Two Standard 9-pin RS-422 female connectors, loop-through. 38.4K Baud
Frame to Control Panel Cable 9-conductor #22 [Belden 9423] 50-foot cable supplied with TDC-100
Max Control Panel Cable Length 150 feet using cable above. 4000 feet if control panel is locally-powered
Video Standards Supported 525/60, 625/50, 720p, 1080i. Menu-selectable between 25 and 30 fr/sec
External Video Reference 1 volt p-p composite analog video [black or other]. BNC loop-through input
GPI Inputs Five. TTL Inputs or dry closures to ground. D-15 female connector
GPI Outputs Five. TTL [HCMOS] Outputs. Same D-15 connector as GPI Inputs
Computer Interface RS-232, also in GPI D-15 connector. 9600 Baud, No Parity
USB Storage Cue lists and menu settings on standard USB thumb drive
USB Drive Format Industry-standard FAT32
AC Power Input 95-250 Volts AC. 50/60 Hertz. Power consumption is 10 watts
Frame Dimensions 19" Wide, 1.75" High, 9.5" Deep (1 Rack Unit)
Control Panel Dimensions 5.25" High, 8.5" Wide, 2.25" Deep